Design Engineering 010394 Reflect-A-GOLD High-Temperature Heat Reflective Adhesive Backed Roll, 1.5" x 15' Roll
Product Description
Related Youtube Videos
Capable of handling continual temperatures up to 850 degrees Fahrenheit
Resists UV degradation for long-term performance
Adhesive protected by a release liner rated up to 325 deegrees Fahrenheit
DEI Reflect-A-GOLD is a metalized polyamide polymer laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and remove. A highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms – anything or area that needs protection from heat. Available in adhesive backed rolls or sheets.
Related Searchs
Top Reviews
-
zukeepr
2024-08-10T00:00:00Works as intended, have wrapped my cold air intake tube to keep IA temps down. Read more -
Ray Mark Huang
2024-10-07T00:00:00Worked as I expected and after a summer of racing it has held up pretty well on the intake. Read more
-
Vic Holtreman
2024-05-24T00:00:00I was skeptical but thought this is inexpensive enough to try. Taped up the bottom of my seat, and the inside of some plastic pieces on the body near my legs. It works really great, I don't feel much heat at all even when stopped at a long light on my Diavel V4. Read more
-
datenavis
2015-01-21T00:00:00Absolutely gorgeous, definitely keeps my intake temps down. As per the heed of other peoples reviews around the internet with premature peeling of the tape, I first sprayed the item I was wrapping with 3M super 77 spray adhesive. In my case I wrapped a turbo inlet I built as it is located across my turbos hot side. Before wrapping the intake, my first few drives with the car showed heat soak after full strong pulls, especially when it is hotter outside. Read more -
Allen Z
2024-07-03T00:00:00I put this over a starter cable and seems to work well so far. Was easy to apply not too thick to apply and fibers made it stronger. Good value. Read more
-
TuCents
2024-06-25T00:00:00I have a 2008 Accord Coupe 2.4l I bought it with around 168k. Read more -
Capt. K
2024-01-21T00:00:00Unsure of total material required, I cut equal strips after basic measuring of diameter and had some overlap. I don’t know the math on single layer performance versus multiples, assuming the quoted performance is based on one layer and safe to assume multiples increase effect lol. This application is for two intakes that are directly above turbos and headers subjecting the intakes to heat soak. Looking forward to reduced temps inline before intercooling. Thankfully I have the ability to display parameters in real time on this vehicle and it is lower than without. However ambients are also much lower than usual too, but the margins have decreased. Read more -
Brandon A
2020-03-26T00:00:00During this corona virus madness I was bored and needed something to do so I ordered this and wrapped the intake piping of my focus ST to create a REAL cold air intake and I gotta say it’s worked decently well. My charge temps have dropped by a few degrees which, for any boosted car, is essential. It’s pretty sticky but you can pull it off and replace it if needed, it’s also decently easy to form around bends and curves, it won’t be the prettiest thing but it’ll work. Read more -
TJ Marshall
2023-04-23T00:00:00Good product. Wrong size. Is 12x24, not 21x24. Would have returned it but needed to use it. Read more
-
Paul Canada
2020-11-25T00:00:00Used this in converting a countertop oven to a reflow soldering oven. It worked well and has held up perfectly. Read more
-
Mhellcat
2019-05-02T00:00:00Quality item as you can expect! Read more
-
C. McKernan
2017-05-27T00:00:00Using for a reflow oven build. Easy to apply and I recommend the 30' roll rather than the 15' as you'll run out if you get too little. The 30 feet worked out being exactly what I needed. Read more -
Vinson
2024-09-09T00:00:00Good quality - Delivered on time Read more